**FREE** insured ground shipping on all ECCO Machine products, **INCLUDING SUPPRESSORS!**
Contact us if you want to upgrade to expedited shipping
*Service work does not qualify for free shipping*
**FREE** insured ground shipping on all ECCO Machine products, **INCLUDING SUPPRESSORS!**
Contact us if you want to upgrade to expedited shipping
*Service work does not qualify for free shipping*
powered by bulletin

Caracal (5.7x28mm)

$439.00$619.00

Clear

Description

Caracal is our lightweight, fully welded suppressor designed specifically for the 5.7x28mm Cartridge, and it is available with either stainless steel or titanium construction.  This is not a rimfire can that is tough enough for 5.7; it is a purpose-built miniaturized rifle can for a miniature rifle cartridge.  Due to a bore that is slightly oversized to reduce backpressure, it is suitable for all other cartridges .25 caliber and smaller burning 15 grains of powder or less, including .17 Hornet, .22 Hornet, .218 Bee and even .25-20 Winchester.

Yes, we have tested it on a 10.5″ 5.56mm AR, but that is not an approved use for this small can!

Caliber: 5.7mm/.22

Rated for: 5.7x28mm, .22 Hornet, .22 WMR, 4.6x30mm,  .17 HMR, .17 WSM, .17 Hornet, .218 Bee, .22 TCM, .25-20 Winchester

Full Auto Rated: Yes*

Minimum Barrel Length: None

Length: 6.1″

Diameter: 1.24″

Weight (Ounces): Stainless steel 6.2 oz w/o mount, Titanium 3.7 oz w/o mount

Attachment: 1.125-28 Alpha compatible, Caracal Ti includes 1/2-28 Ultralight direct thread mount

Suppression: Depends on cartridge and host, ~26 dBA with 5.7mm pistol

Build Material: 17-4 H900 stainless steel or 6Al-4V titanium, fully welded tubeless design

User Serviceable: No

Finish: bead blasted natural or Norrell’s Moly Resin in SOCOM black,  grey-black Colt flat, burnt bronze, Coyote brown, flat brown, flat grey, OD green, foliage green or tan FDE.

 

Use of cast lead bullets, including .22 Short, Long and Long Rifle, is not recommended with sealed suppressors. However, Caracal can be cleaned with harsh chemicals that dissolve lead. Be sure to remove mounts made of or containing aluminum before submerging in solutions that are not aluminum safe.

*Keep temperature of titanium suppressor under 800°F.   1,000°F operating limit for 17-4 H900 stainless steel model.

Warranty: https://www.eccomachine.net/warranty/

ECCO Machine Caracal Stainless is offered standard with no mount for those who wish to run a mounting system other than those we offer (Caracal Ti does include a 1/2-28 Ultralight direct thread mount).   Our Direct thread mounts or taper mount adapters and brakes can be packaged with a suppressor purchase at a lower price point than when purchased individually.

*** Selection of colors aside from SOCOM Black will add 5-10 days to ship time***

An FFL/SOT can only transfer NFA items to residents of the state they are located in. Unless you are a resident of Colorado and will be purchasing at our shop, you will need to provide the FFL & SOT information for your transferring dealer before we can ship. Once we have that information, we will file a Form 3 dealer to dealer transfer and ship your suppressor to your local licensee as soon as the Form 3 is approved, and they will handle your Form 4 transfer from there. The purchase of this item does not cover any fees associated with a  Form 4 transfer.

Additional information

Weight N/A
Dimensions 10 × 4 × 4 in
Material

17-4 H900 Stainless Steel, 6Al-4V Titanium

Moly Resin

Foliage Green, Light Grey Flat, Burnt Bronze, Coyote Brown, Tan FDE, SOCOM Black, Grey-Black Colt Flat, OD Green, Flat Brown

Leave a Reply

Your email address will not be published. Required fields are marked *

Caracal (5.7x28mm)
Caracal (5.7x28mm)
$439.00$619.00
Add to cart