Memorial Day Sale! 10% off all in stock items, including suppressors! Discount valid from 12:01 am MST Saturday 25 May through Monday 27 May 2024 at 11:59 pm MST! Auto-applies in checkout.

(Dealer accounts: regular tiered dealer pricing still applies with no additional discounts)
Memorial Day Sale! 10% off all in stock items, including suppressors! Discount valid from 12:01 am MST Saturday 25 May through Monday 27 May 2024 at 11:59 pm MST! Auto-applies in checkout.

(Dealer accounts: regular tiered dealer pricing still applies with no additional discounts)

Charlie (Saker) to 1.375-24 Bravo Adapter

$66.00$76.00

Clear

Description

This adapter will allow you to use your 1.375-24 threaded Bravo mount/adapter with your 1.375-32 Charlie threaded suppressor.   It does not utilize the internal taper of the Charlie pattern in order to minimize weight and cost, and to maximize clearance for muzzle devices, but as such you will need to clean off the taper surface and rear face of the can after use if you switch back to a Charlie pattern mount.

IMPORTANT: You MUST make sure the tapered piece of any Charlie pattern mount/adapter is removed before using this product.   It may be possible to install this adapter and install some Bravo mounts into it with part of a Charlie mount/adapter still in the taper; using it on a firearm this way could cause damage to the suppressor, adapter(s) or firearm,  and could also cause bodily injury.

Has spanner wrench notches for installation & removal

Material: 17-4 H900 stainless steel, Gr. 9 CSWR Titanium
Length: 1″
Diameter: 1.5″
Weight: (SS) 1.2 ounces, (Ti) .7 ounces

Internal thread: 1.375-24 rear, 1.375-32 front

***This adapter DOES NOT work the other way, it does not allow Charlie mounts to be used with Bravo pattern suppressors***

In stock Natural finish or Black adapters ship 1-2 business days. Other color options add up to 10 business days.  Bronze color is 17-4 stainless natural finish, silver is titanium natural finish.

Note: Due to the small end of a Charlie taper being +/- 1.115″, the JMAC HUB muzzle brake direct thread mounts with a 1.16″ diameter, the HUXWRX HUB adapter with 1.2″ diameter cage and any other mount/adapter with a forward protrusion larger than 1.1″ diameter will be incompatible with your Charlie-to-Bravo adapter equipped suppressor.

Additional information

Material

17-4 H900 Stainless Steel, Gr. 9 CWSR Titanium

Moly Resin

Natural, SOCOM Black, Grey-Black Colt Flat, Flat Light Grey, Coyote Brown, Tan FDE, OD Green, Foliage Green, Burnt Bronze, Flat Brown

4 responses to “Charlie (Saker) to 1.375-24 Bravo Adapter”

    Ronald Goldberg
    February 1, 2024
    Exactly what I needed to standardize my Hybrid 46M on the Bravo/HUB platform. Answered my questions thoroughly before ordering. Well made item that looks stock when installed.
    Elliott
    August 24, 2023
    Exactly what I needed to use a HUB Xeno adapter with my SilencerCo Chimera 300 (Saker). Shipped fast, and looks great!
    Eric
    March 25, 2023
    Awesome idea, This will allow me to use a industry standard size 1.375-24 Dead Air Xeno DA455 mount on my new SilencerCo Velos LBP 5.56 Suppresor because my rifles use the Xeno mounts on them because i also have a Dead Air Sierra 5 and a Dead Air Wolfman.
    Jason
    December 16, 2022
    I ordered the Ecco Bravo to Rugged adapter along with the Charlie to Bravo adapter in order to run an Omega 36M on my rifles that have rugged muzzle brakes....mount works perfectly! I was initially a little concerned with the lack of locking ring on the Rugged adapter, however it feels VERY secure on the rifle. Pic of both adapters on the Omega 36M with ASR mount next to it is attached. Notice that the stacked adapters are only ~1/8" longer that the factory ASR mount. No noticeable difference in weight.

Leave a Reply

Your email address will not be published. Required fields are marked *

Charlie (Saker) to 1.375-24 Bravo Adapter
Charlie (Saker) to 1.375-24 Bravo Adapter
$66.00$76.00
Add to cart