**FREE** insured ground shipping on all ECCO Machine products, **INCLUDING SUPPRESSORS!**
Contact us if you want to upgrade to expedited shipping
*Service work does not qualify for free shipping*
**FREE** insured ground shipping on all ECCO Machine products, **INCLUDING SUPPRESSORS!**
Contact us if you want to upgrade to expedited shipping
*Service work does not qualify for free shipping*
powered by bulletin

TLX (9mm, .45)

$589.00

Clear

Description

Want a tough can that is light enough to run on locked breech pistols without a booster*?   Meet the TLX! Made from 6Al-4V gr. 5 titanium, it is a fully welded 10 baffle tubeless suppressor that can be used on pistols, carbines and sub machine guns. The Alpha pattern threads in the rear will accept 1.125-28 threaded mounts and adapters, including 3 lug and Griffin Cam Lok & EZ Lok**.   TLX comes standard with an ultralight 7075-T651 direct thread mount in your choice of 1/2-28, M13.5×1 LH, 9/16-24, .578-28, 5/8-24 or M16x1 LH (specify thread in note when ordering).

TLX has been subjected to torture testing with back-to-back-to-back drum magazine dumps on 900+ RPM sub machine guns, and even full auto AK47 and 18″ barrel .308 rifles!  Despite it’s scant weight, it’s a tough little bugger!

Caliber: 9mm or .45

Rated for: (9mm model) 9x19mm, .357 Magnum, .300 blk, 7.62×39,  9×39, .350 Legend (.45 model) .45 ACP, .44 magnum, .450 Bushmaster, .458 SOCOM, .45-70

Full Auto Rated: Yes, keep suppressor under 800°F

Minimum Barrel Length: None with service pistol cartridges, 5″ with subsonic .300 blk & full power .357, 12″ with magnum pistol rounds and subsonic rifle rounds burning charges over 15 grs., 16″ for high velocity rifle rounds and all others burning charges of 31-45 grs.  Not rated for cartridges burning charges larger than 45 grains.

Length (Inches): 6.5″, 6.8″ with included mount.

Diameter: 1.3″

Weight (Ounces): 4.1 oz (.45) or 4.3 oz (9mm) with included mount

Attachment: 1.125-28 Alpha compatible

Distance from rear face to blast baffle tip: 1.03″

Suppression: ~27 dBA

Build Materials: 6Al-4V gr. 5 titanium

User Serviceable: No

 

Finish: bead blasted natural or Norrell’s Moly Resin in SOCOM black, gloss black, grey-black Colt flat, burnt bronze, Coyote brown, flat brown, OD green or tan FDE.

TLX ships with a pin wrench for the mount

Use of cast lead bullets is not recommended with sealed suppressors.  However, TLX can be cleaned with harsh chemicals that dissolve lead.   Be sure to remove the aluminum mount first before submerging in solutions that are not aluminum-safe.

*We have not tested all possible host & ammunition combinations.   Some pistols may need more energetic loads with a rigid mounted suppressor, and there are some hosts that simply don’t like to run suppressed, with or without boosters.  We cannot guarantee function of all host firearms, only that all of ours have functioned with TLX using subsonic ammunition, and it is known in the industry that 4-5 ounces is the approximate limit for weight of a suppressor on most locked breech handguns to cycle without the use of a recoil booster.  Hammer fired hosts tend to be more tolerant of added mass than striker fired, though our striker fired weapons have been reliable with TLX using common 147 gr. 9mm and 230 gr. .45 ball ammunition.  It is possible that some pistols out there will still need our Alpha booster assembly to cycle properly even with a 4 ounce suppressor.

**The added mass of some mounts/adapters or optics may cause the total rigid mounted mass to exceed the limit for reliable cycling on short recoil pistols.  Federal Syntech 150 gr. 9mm ammunition has been problematic with hosts that cycle 147 gr. ball and even the lighter-loaded Fiocchi 158 gr. ammunition just fine with TLX.

Additional information

Weight 10 oz
Dimensions 10 × 4 × 4 in
Moly Resin

Foliage Green, Light Grey Flat, Burnt Bronze, Coyote Brown, Tan FDE, SOCOM Black, Grey-Black Colt Flat, OD Green, Flat Brown

Caliber

9mm/.38 cal, .45 Cal

Leave a Reply

Your email address will not be published. Required fields are marked *

TLX (9mm, .45)
TLX (9mm, .45)
$589.00
Add to cart